Trhací nýty typ ALINOX ⌀ 4.8
Trhací nýt ALINOX
Materiál: Hliník / Nerez
Povrchová úprava: bez povrchové úpravy
Trhací nýt hliník / nerez s plochou hlavou
Pevnost ve střihu min. 1850 N, pevnost v tahu min. 2600 N
| Produkt | d1 | S | d2 Max | K Max | ⌀ díry | L Max | D3 Max |
|---|---|---|---|---|---|---|---|
| 34/ALINOX4.8X6 | 4.8 | 1,5 – 2,5 | 10.1 | 2,0 | 4,9 – 5,0 | 6 | 2.95 |
| 34/ALINOX4.8X8 | 4.8 | 2,5 – 4,0 | 10.1 | 2,0 | 4,9 – 5,0 | 8 | 2.95 |
| 34/ALINOX4.8X10 | 4.8 | 4,0 – 6,0 | 10.1 | 2,0 | 4,9 – 5,0 | 10 | 2.95 |
| 34/ALINOX4.8X12 | 4.8 | 6,0 – 8,0 | 10.1 | 2,0 | 4,9 – 5,0 | 12 | 2.95 |
| 34/ALINOX4.8X14 | 4.8 | 8,0 – 10,0 | 10.1 | 2,0 | 4,9 – 5,0 | 14 | 2.95 |
| 34/ALINOX4.8X16 | 4.8 | 10,0 – 12,0 | 10.1 | 2,0 | 4,9 – 5,0 | 16 | 2.95 |
| 34/ALINOX4.8X18 | 4.8 | 12,0 – 13,5 | 10.1 | 2,0 | 4,9 – 5,0 | 18 | 2.95 |
| 34/ALINOX4.8X20 | 4.8 | 14,0 – 16,0 | 10.1 | 2,0 | 4,9 – 5,0 | 20 | 2.95 |
| 34/ALINOX4.8X25 | 4.8 | 16,0 – 20,0 | 10.1 | 2,0 | 4,9 – 5,0 | 25 | 2.95 |
| 34/ALINOX4.8X30 | 4.8 | 20,0 – 25,0 | 10.1 | 2,0 | 4,9 – 5,0 | 30 | 2.95 |
| 34/ALINOX4.8X35 | 4.8 | 25,0 – 30,0 | 10.1 | 2,0 | 4,9 – 5,0 | 35 | 2.95 |